Click to Subscribe! ► - The trommel is fired up, and the crew is ready for a long shift. We are still trying to decide on a name for this monster machine. It is quite windy today, but that wont stop the crew from having an epic day on the mine. The ground is finally thawing, and we are able to get our first few buckets through the pay dirt separator. Our Mining truck is collecting the pay dirt close to where the wash plant will be mounted.
The Trommel was originally built by Mike, aka "MAV",() in early 2014. He did an amazing job visualizing and fabricating this powerful machine. The whole thing runs on 12v, and is very impressive in person. Our first runs were successful, but like in any mining company.. the machine takes a beating and could use a few turns of the wrench. After a year with it, and a few tweaks, the machine is back up on the run.. and what a better way to unveil it again then with a great video! Now we are once again able to mine and filter Good Pay Dirt, from the Debris - soon I will set up the wash plant.
The Tonka Conversion was done by fellow RC enthusiast Judd Phillips, also known as JRPRC () He has a complete playlist on how to convert your very own Tonka Dump truck into an RC. He also has other helpful playlists on how to convert Non-RC construction toys in to Moving Machines you can have fun with!
We are awaiting our loader fixed up and tweaked out by YouTuber "DiggingwithMartin" () When it arrives we will be start moving some serious scale yardage.
The Excavator was purchased from RC4WD.
1/12 Scale Earth Digger 4200XL Hydraulic Excavator:
Earth Digger 4200 hydraulic excavator is the most power excavator available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to dig! Massive power through 350kV brushless system.
100% CNC machined aluminum (except track and hydraulic pump)
Custom 8 channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized steel hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel molded tracks (50mm width, 45 grade carbon steel)
Efficient under carriage with tracks
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (endless)
Powder coated in yellow
Massive brushless system (hydraulic)
125A brushless ESC with BEC
350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft)
Neodymium magnets
Belt/track is track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Digging force: 15kg/33pounds
Driving speed: 310 meter per hour
Scale: 1:12
Dig depth: 495mm/19.4inch
Height of cabin: 155mm/6.1inch
Length: 1.15meter/45inch
Width: 250mm/9.8inch
Height: 840mm/33inch
Deadweight: 20kg/44lbs
Operating oil pressure: 20Bar, 290psi
Manufactured by JDCustoms
trom·mel
noun: MINING
a rotating cylindrical sieve or screen used for washing and sorting pieces of ore or coal.
Where I get my RC Products Locally:
RC ADVENTURES™/ RCSparks Studio™ © 2015 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only.
The Trommel was originally built by Mike, aka "MAV",() in early 2014. He did an amazing job visualizing and fabricating this powerful machine. The whole thing runs on 12v, and is very impressive in person. Our first runs were successful, but like in any mining company.. the machine takes a beating and could use a few turns of the wrench. After a year with it, and a few tweaks, the machine is back up on the run.. and what a better way to unveil it again then with a great video! Now we are once again able to mine and filter Good Pay Dirt, from the Debris - soon I will set up the wash plant.
The Tonka Conversion was done by fellow RC enthusiast Judd Phillips, also known as JRPRC () He has a complete playlist on how to convert your very own Tonka Dump truck into an RC. He also has other helpful playlists on how to convert Non-RC construction toys in to Moving Machines you can have fun with!
We are awaiting our loader fixed up and tweaked out by YouTuber "DiggingwithMartin" () When it arrives we will be start moving some serious scale yardage.
The Excavator was purchased from RC4WD.
1/12 Scale Earth Digger 4200XL Hydraulic Excavator:
Earth Digger 4200 hydraulic excavator is the most power excavator available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to dig! Massive power through 350kV brushless system.
100% CNC machined aluminum (except track and hydraulic pump)
Custom 8 channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized steel hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel molded tracks (50mm width, 45 grade carbon steel)
Efficient under carriage with tracks
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (endless)
Powder coated in yellow
Massive brushless system (hydraulic)
125A brushless ESC with BEC
350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft)
Neodymium magnets
Belt/track is track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Digging force: 15kg/33pounds
Driving speed: 310 meter per hour
Scale: 1:12
Dig depth: 495mm/19.4inch
Height of cabin: 155mm/6.1inch
Length: 1.15meter/45inch
Width: 250mm/9.8inch
Height: 840mm/33inch
Deadweight: 20kg/44lbs
Operating oil pressure: 20Bar, 290psi
Manufactured by JDCustoms
trom·mel
noun: MINING
a rotating cylindrical sieve or screen used for washing and sorting pieces of ore or coal.
Where I get my RC Products Locally:
RC ADVENTURES™/ RCSparks Studio™ © 2015 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only.
- Category
- Kereta - Car
Sign in or sign up to post comments.
Be the first to comment